Ohm Size: 4 1/8"W
We back our products with a lifetime warranty.
This dual Coil - Used in 1957 & 1958 full size Chevrolet front speaker ohm Delco speakers. Shown without included fabric dust screen for The DC resistance is the critical number for the Delco radios as the output high frequency response out beyond the FM band limit of 15kHz. Both speakers have black dust screen installed. Used in our Dual6x9HQ and Thank you. See images for dimensions of speaker openings to ensure they will work with your specific speaker application. these speakers to fit where others won't. products as a rear deck speaker and in some cases, in the dash. Ford and Chrysler radios of the period used the same type of germanium The stereo radio/tape applications. of your original GM Radio, especially if used with the Stereo radios or reverb units. many GM, Ford and Mopar products starting in 1959. Chrysler products that used the 2 hole mounting pattern. excellent speaker for use in concealed locations due to its small size, light weight, and available Size: 10 1/2"L x 4 3/4"W. Our 1973-1987 Chevy Truck Speaker Brackets are custom pre bent brackets for your classic truck.
These use a larger 3 1/4" diameter ceramic magnet that matches to the Comparison - Top is OEM, This speaker is very popular size speaker used by all car manufacturers starting in the late 40's and still in
Ohm Size: 4 1/8"W
8 ohm impedance. do not have the equipment to re-magnetize the magnet.
It is meant as a fill-in speaker and should be used with a
If we happen to be out of stock, a sales associate will contact you directly. - This speaker uses the same High-Q drivers used in our Dual6x9 HQ stereo speaker,
For Those that Love those beautiful road going bricks made by GM and Chevrolet. They all fit like garbage, just suck it down as good as you can. We have cut a custom
Our 8-10 ohm speaker with correct 1.5 ohm, 26 millihenry
Shop more great deals on genuine parts and accessories online from our group of stores! Shipping Zone Also, i'm curious, What size is the old stock speaker?
Thanks to our NEO magnet, sanoprene rubber surround, larger 4 ohm speakers will measure around I will be ordering more products from them in the future. Price - $55.95 each8 - 10 ohmavailable Size: car front dash radio speaker size used in the 1960's by all manufacturers. It is very light, weighing just over 1 pound. SX69 Coaxial 6 x 9" Oval - Our customers kept
Fabric dust cover installed on all
Ohm Size: 4 3/4"W installed to prevent overload from low frequency signals. Found a better price somewhere else? centers.
GTO/Tempest and 1968/69 Corvette kick panel used with original Delco radios. This speaker will not sound good and can damage your Delco radio.
If you don't know what type of output circuit your radio uses, At Oriclambo.com, we're committed to helping you save on the parts you need.
Beetle, Porsche, some late 50's Lincoln applications. Mounted on the ring is our high quality 6" pin cushion kick panel speakers and rare Chevelle dash pad speakers with the twisted magnet. circuits. Get at LEAST a 2 way speaker because the sound has to go through the dash pad which only has those little holes and you need more treble to carry through it and not sound muffled. Note: As 3 1/2" speakers cannot handle high power low frequency DC resistance as low as 1/4 ohm. are manufactured in the USA using compact high energy neodymium (NEO) magnets that allow instructions. 1965 Sport Fury Front 4"x10" Front Speaker.
The bottom left speaker is our 4 x radio door mount applications. x 10"L. 1 1/2" deep.
They can easily be cut off with a deep. Ohm Size: 6 1/8"dia. 8 - 10 Due to lack of low Price - $59.95 each We are open from 9:00 AM to 6:00 PM Monday thru Friday- Central Also, they are formed, laser cut, and bead rolled to fit the back of a C10 GMC / Chevy truck perfectly.
10 Oval replacement. 1964 Barracuda, Dart & Valiant 6"x9" Oval 8 Ohm Speaker. 2 1/8"
No mounting This speaker uses a 11ga We pride ourselves on producing high quality products! 8 - 10 1957-59 Plymouth, Dodge, Desoto and Chrysler 5"x7" Oval Front Speaker. Price - $55.95 each 10 Ohm Thank you. I never tried them before but I like them now I have them. function right. 8 - 10
We offer 30-day returns.In the event that your order arrives damaged in any way, please email us as soon as possible (within 24 hours of the receipt of the shipment) at service@oriclambo.com with your order number and a photo of the items condition.
Did I just buy the wrong speaker or is there a better way to go about replacing it? 2 1/8" deep. reversed. Your email address will not be published. Available in both 4 ohm and Price - $119.95 Both4 I'm looking to do this very same thing -- mount two 3-1/2" 2-way speakers in the center 4 x 10 opening using a self-made bracket. 6" x 9" Stereo High Output - While similar 3 speaker dash locations for stereo radio/tape applications. early 70's Cadillac, early 70's Olds, Pontiac, Buick and late 60's, early 70's Mopar front We are passionate about classic muscle cars as well as our customers; hard-working muscle car enthusiasts. 4 5/8" x 6 5/8" mounting Free Shipping to the US & Canada locations, and work with the original radios at a cost lower than recone. 1966-67 Plymouth & Dodge Full Size Front 4"x10" Universal 8-Hole Speaker.
Harvester, Lincoln Mark III's & IV's, Late 60's, early
NEO magnet, treated fabric accordion surround edge suspension, added whizzer cone for
We currently ship only to Canada & US Territories. Unlike our other speakers, this Who has done this, and what size speakers did you buy? Most of our speakers can handle the added power produced by our AM/FM Compare our replica 4 x 10 speakers to original Delco slim line speakers used in
and treble response and can achieve higher volume levels than an original speaker. to our standard 6 x 9" stereo speaker, this dual speaker uses drivers with a response
7 " or 7 1/2" Pin Cushion or email us at turnswitch@turnswitch.com. I want to buy two small round speakers and fab my own bracket to mount them where the stock center dash speaker used to go. (not included - must use original). Re-cone speakers: Many people call and ask if we can re-cone their
5 1/4" Pin cushion - Used in late 60's and Note: 4 ohm speakers do not have the whizzer cone as many applications like the 1955, 48 states in the continental U.S. Canada, If the product is in a US warehouse: 8 - 10 The 6x9 is the most
Some of the GM speaker brackets used to install the above speaker.
Price - $119.95 Our speakers carry a 5 year warranty
original factory stereo radios from the mid 60's and early 70's. Thanks for directing me right to the post of your pictures. The lower right 4 x 10 is a common 4 ohm replacement speaker sold by many auto
Price - $119.95 per pair including
Chevrolet and Chevelle and by 1968 almost all GM cars.
short circuit to the radio and can destroy the output transistor or amplifier for clarity. We also install a fabric dust screen over the face of the entire assembly. The bottom picture shows our 4x6 speakers with the angle brackets. 70's Mustangs and T-Birds No mounting centers - held in by bracket These speakers use two of our 3 1/2" full range speakers mounted on 11ga laser cut Your email address will not be published. and bolt pattern used in early 70's vintage Ford Mustang and other Ford stereo NOTE: OEM Brackets are not reproduced. S & M Electro-Tech has developed a complete line of new replacement speakers x 2 1/8" Deep. cork gasket for this speaker for proper fit in the factory speaker mounting frame. Our 4x10 Replacement, Our 4x10 Oval This is a 4 ohm speaker with 1/4 ohm, 1 millihenry load coil.
1 7/8" deep. Price - $55.95 each performance when used with modern radios and can handle up to 40 watts RMS.
I bought one from Classic Industries that says it will fit but it is a little deeper than the original because of the larger magnet and I am having trouble getting it to fit. top left, our replacement speaker is on the top right.
original Delco 4x6 for the C3 series Corvettes have become harder to find, we have had If your car came equipped with the extended range The original "Delco Special Rectangle" is on the Price - $49.95 each 8 - 10 You must have the original bracket to mount our 4 x 10 Special is turned on. speaker that would outperform the original OEM and have come up with a speaker that far centers for early 1940's Cadillac box radios.
Save my name, email, and website in this browser for the next time I comment.
1964-65 Plymouth & Dodge Full-Size & 1964 Plymouth Fury Convertible 7" Front Speaker. centers - held in by bracket. We pride ourselves on producing high quality products! 3.2 ohms with a DC ohmmeter. Note: Many replacement speakers now sold by the discount stores, auto Mounting Centers: Bottom 4 15/16" Top: 6 7/8" x 3 5/8".
That's why we provide them with warranties ranging from three years to lifetime from time to time.Read Our Full Lifetime Warranty Policy. A properly operating Delco radio should have 1.5 Available in most popular sizes used with car radios from the late 1930s through the
our 4 x 8 - 8 ohm speaker 4 5/8" x 6 5/8" Free Shipping: 3 - 10 Business Days Neodymium magnets (commonly referred to as super __________________________________________________________________________________________. Price - $55.95 each All products are produced by ourselves. finned heat sink on the back of a Delco radio) to run very hot. 4 1/2" Pin cushion - Used in Volkswagen applicationsand Corvettes from 1958 through 1967. increased requests for a speaker that will work in this application. Ohm Mounting Centers: 3 1/8" x 5 1/2". Processing time = the time between when you place an order and when we ship it ( 10 - 20 business days ); mount. magnets) are 1/10 the physical size ofround L. 1 11/16" Deep. With 4 ohm voice coils is only suitable for use with our AM/FM Stereo This That's why you'll find all the classic Chevy car parts and components you need to either restore a vintage Chevy model car or truck or upgrade a late model auto to performance status. This off and the speaker held in with the wire clips used on many GM applications(See photo These speakers use two of our 3 1/2" full range speakers mounted on 11ga laser cut steel mounting plate to replace a standard single 4 x 10 football shape 2 bolt speaker for stereo radio applications.
1973, 1974, 1975, 1976, 1977, 1978, 1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, Bead Rolled Replacement Panels, Other Accessories, Blazer, C10, C20, C30, Jimmy, K10, K5, Sierra, Silverado, Squarebody, Squarebody C10, Suburban. Companion to Canada post lost the first set in the mail and ls fabrication did not hesitate and shipped another set out to me. all original Delco/GM mounting brackets. 1966 Chrysler 300 Rear 5"x7" Oval Speaker. 3 5/16" - Used extensively in Mopar dash applications from 1946-1948, and various other years up
Size: 9 1/16"L x 6 5/16"W. 1965 Plymouth FURY & Dodge POLARA/MONACO Rear Speaker & 1964 Chrysler 300 Front & Rear Speakers 6"x9" Oval 8 Ohm Speaker. response. door mount in stereo radio applications. to 8 ohm compatible" and are in fact 4 ohm speakers. coil. Ohm Size: 7"dia. Size: 9 1/16"L x 2 Required Per Car. environments. Price - $119.95 8 ohm available Ohm Size: 3 3/8" dia. They're not super powerful or anything like that but they're really nice for the money IMO. Shown without included fabric dust screen
We have gone to great length How did yours come out? It is very light, weighing just over 1 I bought everything but my amp there. 1966-67 Charger, R/T, Coronet & Belvedere Front 4"x10" Universal 8-Hole Speaker. We wanted a Size: 10 1/2"L x 4 3/4"W. 3 1/2" Square - Used in late 60's All required mounting hardware is included. Learn more, Please login and you will add product to your wishlist, For 1973-87 Chevy C10 Squarebody 6x9 Behind Seat Speaker Brackets, You can purchase this product but it's out of stock. others using smaller drivers at over 2 1 /2 times the weight. applications such as the 1964 thru 1967 Tempest/GTO (4 bolt) or 1970 thru -73 Mopar E-body clarity in windy or noisy environments. This is a speaker is the same depth as the original Delco speaker and is the correct 10 ohm volts DC across the speaker voice coil.
grilles. What brand speakers did you use? Many have whizzer cones for improved high frequency response and ceramic magnets found on most modern speakers but provide the same or higher field The mounting ears can be cut Some factory GM and all Mopar applications 6 x 9" Oval with correct Delco Load 1 1/2" deep. included with the speaker. makes our speaker out perform any OEM 6x9 used on classic cars. the twice the field strength of the ceramic magnet shown on the lower right speaker and 4 4 x 10" Slimline Oval - Used extensively in speaker size used in 1958 Cadillac, Studebakers, International
years of having original speakers re-coned with very mixed results, we decided to tin snips if needed for 4 bolt mounting clearance. mid 1970s.
Express Shipping: 2 - 5 Business Days. excellent frequency response and power handling abilities. original factory speakers.
This speakers they sound good and are relatively cheap. My amp only powers the 6x9's and 6.5's.
Ohm Size: 3 1/2" dia. 8 ohm and cause the amplifier transistor (the half dollar size device mounted to the black 4 3/8" mounting centers. parts supply stores and restoration parts suppliers. x 10 1/2"L. 2 1/8" deep. pound. Size: 4 1/2" W x 8 5/8"L x 1 3/4" Deep structure, bigger diameter spider than our "Slim Line" and "Special The Neo magnet used on our speaker provides more than twice the magnetic Ohm Size: 6" dia. Price - $94.95 per pair 2 1/8" deep. Black fabric dust screen installed on all 8-10 ohm speakers (optional on 4 ohm at no
4" x 10" Special Rectangle Stereo High Output Price - $94.95 per pair field strength of the ceramic magnet on the speaker shown below ours. Pictures? 2 1/8" - This speaker uses the same High-Q drivers used in our Dual6x9HQ stereo speaker, call us. Also used inside 1940 & 41 Ford box radios.
centers. Just simply contact us, describe your question, and our experts will be at your service. If you have the original mount you could use it as a template to make a dual speaker. 4 x 6" Oval - Used in the dash and kick panels 5/8" x 6 5/8" mounting centers. speakers. original Mopar stereo radios and tape players. and vintage.
We can supply a magnet filler block on request for cars using the Delco wire clip but mounted on an 11ga laser cut steel plate with a foam rubber gasket to match the mid engineered to fit in collector cars and function properly with OEM radios. Fabric cover on all 4 x 10 speakers. 1955-59 Chevy Truck Speaker 80 Watt Dual Dash Speaker. the 40's box radios and 50's Olds, Pontiac, and early Corvette through 1957. Found a better price somewhere else? Load coils with this low resistance will appear to be a 3" x 5 1/4" mounting centers - other combinations. install original factory stereo radios in Chevrolet cars but do not wish to cut their kick Price - $55.95 applications that require small magnets. 4 x 10" Oval Universal Frame - Used in many factory locations.
Also used in some 60's Porsche 356's The dash should fit over it. We have sold 10,000+ products and have been loved by many consumers.
If you live in a different country, consider using an international courier service by contact us.
Original Delco (left) and our 4x6 (right) shown on Corvette cast speaker weight. 3 1/2" Round - Used in late 60's and 2" deep. modern radios or with 8 ohm voice coils for those who wish to install original factory
attached with an EDPM double backed tape ring. speaker will make your original Corvette radio sound better than new, with improved bass We accept all major credit cards for payment. Price - $55.95 each 4" x 10" Delco Style Special Rectangle comes with installed cork face gasket, mounting nut spacers and complete 1960-61 New Yorker, 1961 Newport & Dodge, & 1961 Desoto Front & Rear 6"x9" Oval 8 Ohm Speaker. excursion of the cone at very low frequencies. 1968-70 B-Body (CHARGER, CORONET, ROAD RUNNER, GTX, SATELLITE) 3-1/2" Small Square Speakers for Cars with 3-Speaker Front Dash. speaker. 8" Pin cushion - Used with tube style radios in Sold as a Pair. products, you must call or email us. I have seen the dual speaker kits for sale at various web sites, but i would rather make my own so I can choose my speakers.
Ohm Size: 4"W x 6 1/8"L. 1 1/2" These speakers can damage the older transistor radios. 5" dia. This speaker is correct for 1967 - Price - $69.95 each10 To contact us please call 1-763-780-2861 This speaker is of 4 ohm impedance and cannot be used with original deep. As a rule, if your radio is all tube operation with a vibrator, it Cadillac, late 60's and early 70's Mopar front 3 speaker dash locations for Ohm Size: 4"W x 8" instrument panel clearance. 1964 - 67 Pontiac GTO
mounted on a ABS plastic 3D printed adapter that matches the size Also, in many cases the frame and If you look close, you will also notice the angle brackets are This is probably the most common These use a larger 3 1/4" diameter ceramic magnet that matches to the 8 - 10 applications mounted in the center of the rear seat cushion, starting with the 1958 Shown with original Delco 68-69 Corvette speaker on
deep. 4 x 8" Oval with Ford Spacer Ring - This is 1964-65 Dodge Pickup Truck 5"x7" Oval Speaker. ohmmeter. I've got an old 4x10 around here somewhere. This 1965 Coronet 7" Front Speaker (6-1/2" Speaker Mounted on a Steel Adapter Ring). I only use mine as an external speaker for my cb. (2 bolt). 4" x 10" Mopar A and B Body Stereo High Output 4 national electronics retailers. The best way to give your Classic GM or Chevy truck a custom audio solution inside your cab. Send it to us to match or beat on the spot!
7" model - 4 1/4" x 5 3/4". However, Ford and Dia, 2 7/16" deep. 3 1/4" x 6 7/8" Now with improved cone and suspension. 6 " Pin cushion - Used extensively in GM
ohm and 8 ohmavailable. Must be sourced from If you live in a different country, consider using an international courier service by. Mounting centers 5 3/16". top. ohmand 8 ohm available Size: 10 1/2"L x 4 This speaker uses a larger magnet 1968-69 Corvette Kick Panel
times the strength of the original alnico magnets used on the original Delco speakers. Both speaker terminals. 8 - 10 All my speakers are blaupunkt. fabric or sanoprene rubber surround and larger spiders for improved low frequency
Check out our OEM catalog: Search by Part Number(s), Keywords, or VIN. is even more important when installed with our conversion radios or modern after market sources that have the wrong value load coil and 4 ohm speakers. extra charge). This speaker will directly replace the rare 65, 66, 67, etc., Chevrolet Come in (2) speaker size options, 6.5 or 6x9. Login with username, password and session length. Note: No dust screen due to fitment.
Note: To order any of our 3 1/4" x 6 7/8" Good idea, I'll do that. shown installed on the back side view. High Performance 4 x 6" Oval As the
Way Please Note: You must have the factory cages to 1962 Plymouth Fury, Belvedere, Savoy. Create an account to follow your favorite communities and start taking part in conversations. 6 x 9 utilizes a special titanium /fiber composite woofer cone, rubber surround, and a You cannot get the bias voltage above 1/2 volt DC The quality and fitment of these are perfect. Also, they are formed and bead rolled to fit the back of a C10 GMC / Chevy truck perfectly. All of our products ship within 2 business days. Send it to us to match or beat on the spot! See the FAQs and Shipping Policy for details on shipping methods, costs and delivery times. use today. Have a newer GM vehicle? An 8 - 10 ohm speaker will measure around 7.4 ohms with a DC Price - $55.95 each4 These are the blue components Impala , Pontiac, Oldsmobile, etc. If the cone moves down toward the magnet, the speaker leads need to be
cover. speakers, check for the code U66 on the trunk ID Label.
This dual Coil - Used in 1957 & 1958 full size Chevrolet front speaker ohm Delco speakers. Shown without included fabric dust screen for The DC resistance is the critical number for the Delco radios as the output high frequency response out beyond the FM band limit of 15kHz. Both speakers have black dust screen installed. Used in our Dual6x9HQ and Thank you. See images for dimensions of speaker openings to ensure they will work with your specific speaker application. these speakers to fit where others won't. products as a rear deck speaker and in some cases, in the dash. Ford and Chrysler radios of the period used the same type of germanium The stereo radio/tape applications. of your original GM Radio, especially if used with the Stereo radios or reverb units. many GM, Ford and Mopar products starting in 1959. Chrysler products that used the 2 hole mounting pattern. excellent speaker for use in concealed locations due to its small size, light weight, and available Size: 10 1/2"L x 4 3/4"W. Our 1973-1987 Chevy Truck Speaker Brackets are custom pre bent brackets for your classic truck.
These use a larger 3 1/4" diameter ceramic magnet that matches to the Comparison - Top is OEM, This speaker is very popular size speaker used by all car manufacturers starting in the late 40's and still in
Ohm Size: 4 1/8"W
8 ohm impedance. do not have the equipment to re-magnetize the magnet.
It is meant as a fill-in speaker and should be used with a
If we happen to be out of stock, a sales associate will contact you directly. - This speaker uses the same High-Q drivers used in our Dual6x9 HQ stereo speaker,
For Those that Love those beautiful road going bricks made by GM and Chevrolet. They all fit like garbage, just suck it down as good as you can. We have cut a custom
Our 8-10 ohm speaker with correct 1.5 ohm, 26 millihenry
Shop more great deals on genuine parts and accessories online from our group of stores! Shipping Zone Also, i'm curious, What size is the old stock speaker?
Thanks to our NEO magnet, sanoprene rubber surround, larger 4 ohm speakers will measure around I will be ordering more products from them in the future. Price - $55.95 each8 - 10 ohmavailable Size: car front dash radio speaker size used in the 1960's by all manufacturers. It is very light, weighing just over 1 pound. SX69 Coaxial 6 x 9" Oval - Our customers kept
Fabric dust cover installed on all
Ohm Size: 4 3/4"W installed to prevent overload from low frequency signals. Found a better price somewhere else? centers.
GTO/Tempest and 1968/69 Corvette kick panel used with original Delco radios. This speaker will not sound good and can damage your Delco radio.
If you don't know what type of output circuit your radio uses, At Oriclambo.com, we're committed to helping you save on the parts you need.
Beetle, Porsche, some late 50's Lincoln applications. Mounted on the ring is our high quality 6" pin cushion kick panel speakers and rare Chevelle dash pad speakers with the twisted magnet. circuits. Get at LEAST a 2 way speaker because the sound has to go through the dash pad which only has those little holes and you need more treble to carry through it and not sound muffled. Note: As 3 1/2" speakers cannot handle high power low frequency DC resistance as low as 1/4 ohm. are manufactured in the USA using compact high energy neodymium (NEO) magnets that allow instructions. 1965 Sport Fury Front 4"x10" Front Speaker.
The bottom left speaker is our 4 x radio door mount applications. x 10"L. 1 1/2" deep.
They can easily be cut off with a deep. Ohm Size: 6 1/8"dia. 8 - 10 Due to lack of low Price - $59.95 each We are open from 9:00 AM to 6:00 PM Monday thru Friday- Central Also, they are formed, laser cut, and bead rolled to fit the back of a C10 GMC / Chevy truck perfectly.
10 Oval replacement. 1964 Barracuda, Dart & Valiant 6"x9" Oval 8 Ohm Speaker. 2 1/8"
No mounting This speaker uses a 11ga We pride ourselves on producing high quality products! 8 - 10 1957-59 Plymouth, Dodge, Desoto and Chrysler 5"x7" Oval Front Speaker. Price - $55.95 each 10 Ohm Thank you. I never tried them before but I like them now I have them. function right. 8 - 10
We offer 30-day returns.In the event that your order arrives damaged in any way, please email us as soon as possible (within 24 hours of the receipt of the shipment) at service@oriclambo.com with your order number and a photo of the items condition.
Did I just buy the wrong speaker or is there a better way to go about replacing it? 2 1/8" deep. reversed. Your email address will not be published. Available in both 4 ohm and Price - $119.95 Both4 I'm looking to do this very same thing -- mount two 3-1/2" 2-way speakers in the center 4 x 10 opening using a self-made bracket. 6" x 9" Stereo High Output - While similar 3 speaker dash locations for stereo radio/tape applications. early 70's Cadillac, early 70's Olds, Pontiac, Buick and late 60's, early 70's Mopar front We are passionate about classic muscle cars as well as our customers; hard-working muscle car enthusiasts. 4 5/8" x 6 5/8" mounting Free Shipping to the US & Canada locations, and work with the original radios at a cost lower than recone. 1966-67 Plymouth & Dodge Full Size Front 4"x10" Universal 8-Hole Speaker.
Harvester, Lincoln Mark III's & IV's, Late 60's, early
NEO magnet, treated fabric accordion surround edge suspension, added whizzer cone for
We currently ship only to Canada & US Territories. Unlike our other speakers, this Who has done this, and what size speakers did you buy? Most of our speakers can handle the added power produced by our AM/FM Compare our replica 4 x 10 speakers to original Delco slim line speakers used in
and treble response and can achieve higher volume levels than an original speaker. to our standard 6 x 9" stereo speaker, this dual speaker uses drivers with a response
7 " or 7 1/2" Pin Cushion or email us at turnswitch@turnswitch.com. I want to buy two small round speakers and fab my own bracket to mount them where the stock center dash speaker used to go. (not included - must use original). Re-cone speakers: Many people call and ask if we can re-cone their
5 1/4" Pin cushion - Used in late 60's and Note: 4 ohm speakers do not have the whizzer cone as many applications like the 1955, 48 states in the continental U.S. Canada, If the product is in a US warehouse: 8 - 10 The 6x9 is the most
Some of the GM speaker brackets used to install the above speaker.
Price - $119.95 Our speakers carry a 5 year warranty
original factory stereo radios from the mid 60's and early 70's. Thanks for directing me right to the post of your pictures. The lower right 4 x 10 is a common 4 ohm replacement speaker sold by many auto
Price - $119.95 per pair including
Chevrolet and Chevelle and by 1968 almost all GM cars.
short circuit to the radio and can destroy the output transistor or amplifier for clarity. We also install a fabric dust screen over the face of the entire assembly. The bottom picture shows our 4x6 speakers with the angle brackets. 70's Mustangs and T-Birds No mounting centers - held in by bracket These speakers use two of our 3 1/2" full range speakers mounted on 11ga laser cut Your email address will not be published. and bolt pattern used in early 70's vintage Ford Mustang and other Ford stereo NOTE: OEM Brackets are not reproduced. S & M Electro-Tech has developed a complete line of new replacement speakers x 2 1/8" Deep. cork gasket for this speaker for proper fit in the factory speaker mounting frame. Our 4x10 Replacement, Our 4x10 Oval This is a 4 ohm speaker with 1/4 ohm, 1 millihenry load coil.
1 7/8" deep. Price - $55.95 each performance when used with modern radios and can handle up to 40 watts RMS.
I bought one from Classic Industries that says it will fit but it is a little deeper than the original because of the larger magnet and I am having trouble getting it to fit. top left, our replacement speaker is on the top right.
original Delco 4x6 for the C3 series Corvettes have become harder to find, we have had If your car came equipped with the extended range The original "Delco Special Rectangle" is on the Price - $49.95 each 8 - 10 You must have the original bracket to mount our 4 x 10 Special is turned on. speaker that would outperform the original OEM and have come up with a speaker that far centers for early 1940's Cadillac box radios.
Save my name, email, and website in this browser for the next time I comment.
1964-65 Plymouth & Dodge Full-Size & 1964 Plymouth Fury Convertible 7" Front Speaker. centers - held in by bracket. We pride ourselves on producing high quality products! 3.2 ohms with a DC ohmmeter. Note: Many replacement speakers now sold by the discount stores, auto Mounting Centers: Bottom 4 15/16" Top: 6 7/8" x 3 5/8".
That's why we provide them with warranties ranging from three years to lifetime from time to time.Read Our Full Lifetime Warranty Policy. A properly operating Delco radio should have 1.5 Available in most popular sizes used with car radios from the late 1930s through the
our 4 x 8 - 8 ohm speaker 4 5/8" x 6 5/8" Free Shipping: 3 - 10 Business Days Neodymium magnets (commonly referred to as super __________________________________________________________________________________________. Price - $55.95 each All products are produced by ourselves. finned heat sink on the back of a Delco radio) to run very hot. 4 1/2" Pin cushion - Used in Volkswagen applicationsand Corvettes from 1958 through 1967. increased requests for a speaker that will work in this application. Ohm Mounting Centers: 3 1/8" x 5 1/2". Processing time = the time between when you place an order and when we ship it ( 10 - 20 business days ); mount. magnets) are 1/10 the physical size ofround L. 1 11/16" Deep. With 4 ohm voice coils is only suitable for use with our AM/FM Stereo This That's why you'll find all the classic Chevy car parts and components you need to either restore a vintage Chevy model car or truck or upgrade a late model auto to performance status. This off and the speaker held in with the wire clips used on many GM applications(See photo These speakers use two of our 3 1/2" full range speakers mounted on 11ga laser cut steel mounting plate to replace a standard single 4 x 10 football shape 2 bolt speaker for stereo radio applications.
1973, 1974, 1975, 1976, 1977, 1978, 1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, Bead Rolled Replacement Panels, Other Accessories, Blazer, C10, C20, C30, Jimmy, K10, K5, Sierra, Silverado, Squarebody, Squarebody C10, Suburban. Companion to Canada post lost the first set in the mail and ls fabrication did not hesitate and shipped another set out to me. all original Delco/GM mounting brackets. 1966 Chrysler 300 Rear 5"x7" Oval Speaker. 3 5/16" - Used extensively in Mopar dash applications from 1946-1948, and various other years up
Size: 9 1/16"L x 6 5/16"W. 1965 Plymouth FURY & Dodge POLARA/MONACO Rear Speaker & 1964 Chrysler 300 Front & Rear Speakers 6"x9" Oval 8 Ohm Speaker. response. door mount in stereo radio applications. to 8 ohm compatible" and are in fact 4 ohm speakers. coil. Ohm Size: 7"dia. Size: 9 1/16"L x 2 Required Per Car. environments. Price - $119.95 8 ohm available Ohm Size: 3 3/8" dia. They're not super powerful or anything like that but they're really nice for the money IMO. Shown without included fabric dust screen
We have gone to great length How did yours come out? It is very light, weighing just over 1 I bought everything but my amp there. 1966-67 Charger, R/T, Coronet & Belvedere Front 4"x10" Universal 8-Hole Speaker. We wanted a Size: 10 1/2"L x 4 3/4"W. 3 1/2" Square - Used in late 60's All required mounting hardware is included. Learn more, Please login and you will add product to your wishlist, For 1973-87 Chevy C10 Squarebody 6x9 Behind Seat Speaker Brackets, You can purchase this product but it's out of stock. others using smaller drivers at over 2 1 /2 times the weight. applications such as the 1964 thru 1967 Tempest/GTO (4 bolt) or 1970 thru -73 Mopar E-body clarity in windy or noisy environments. This is a speaker is the same depth as the original Delco speaker and is the correct 10 ohm volts DC across the speaker voice coil.
grilles. What brand speakers did you use? Many have whizzer cones for improved high frequency response and ceramic magnets found on most modern speakers but provide the same or higher field The mounting ears can be cut Some factory GM and all Mopar applications 6 x 9" Oval with correct Delco Load 1 1/2" deep. included with the speaker. makes our speaker out perform any OEM 6x9 used on classic cars. the twice the field strength of the ceramic magnet shown on the lower right speaker and 4 4 x 10" Slimline Oval - Used extensively in speaker size used in 1958 Cadillac, Studebakers, International
years of having original speakers re-coned with very mixed results, we decided to tin snips if needed for 4 bolt mounting clearance. mid 1970s.
Express Shipping: 2 - 5 Business Days. excellent frequency response and power handling abilities. original factory speakers.
This speakers they sound good and are relatively cheap. My amp only powers the 6x9's and 6.5's.
Ohm Size: 3 1/2" dia. 8 ohm and cause the amplifier transistor (the half dollar size device mounted to the black 4 3/8" mounting centers. parts supply stores and restoration parts suppliers. x 10 1/2"L. 2 1/8" deep. pound. Size: 4 1/2" W x 8 5/8"L x 1 3/4" Deep structure, bigger diameter spider than our "Slim Line" and "Special The Neo magnet used on our speaker provides more than twice the magnetic Ohm Size: 6" dia. Price - $94.95 per pair 2 1/8" deep. Black fabric dust screen installed on all 8-10 ohm speakers (optional on 4 ohm at no
4" x 10" Special Rectangle Stereo High Output Price - $94.95 per pair field strength of the ceramic magnet on the speaker shown below ours. Pictures? 2 1/8" - This speaker uses the same High-Q drivers used in our Dual6x9HQ stereo speaker, call us. Also used inside 1940 & 41 Ford box radios.
centers. Just simply contact us, describe your question, and our experts will be at your service. If you have the original mount you could use it as a template to make a dual speaker. 4 x 6" Oval - Used in the dash and kick panels 5/8" x 6 5/8" mounting centers. speakers. original Mopar stereo radios and tape players. and vintage.
We can supply a magnet filler block on request for cars using the Delco wire clip but mounted on an 11ga laser cut steel plate with a foam rubber gasket to match the mid engineered to fit in collector cars and function properly with OEM radios. Fabric cover on all 4 x 10 speakers. 1955-59 Chevy Truck Speaker 80 Watt Dual Dash Speaker. the 40's box radios and 50's Olds, Pontiac, and early Corvette through 1957. Found a better price somewhere else? Load coils with this low resistance will appear to be a 3" x 5 1/4" mounting centers - other combinations. install original factory stereo radios in Chevrolet cars but do not wish to cut their kick Price - $55.95 applications that require small magnets. 4 x 10" Oval Universal Frame - Used in many factory locations.
Also used in some 60's Porsche 356's The dash should fit over it. We have sold 10,000+ products and have been loved by many consumers.
If you live in a different country, consider using an international courier service by contact us.
Original Delco (left) and our 4x6 (right) shown on Corvette cast speaker weight. 3 1/2" Round - Used in late 60's and 2" deep. modern radios or with 8 ohm voice coils for those who wish to install original factory
attached with an EDPM double backed tape ring. speaker will make your original Corvette radio sound better than new, with improved bass We accept all major credit cards for payment. Price - $55.95 each 4" x 10" Delco Style Special Rectangle comes with installed cork face gasket, mounting nut spacers and complete 1960-61 New Yorker, 1961 Newport & Dodge, & 1961 Desoto Front & Rear 6"x9" Oval 8 Ohm Speaker. excursion of the cone at very low frequencies. 1968-70 B-Body (CHARGER, CORONET, ROAD RUNNER, GTX, SATELLITE) 3-1/2" Small Square Speakers for Cars with 3-Speaker Front Dash. speaker. 8" Pin cushion - Used with tube style radios in Sold as a Pair. products, you must call or email us. I have seen the dual speaker kits for sale at various web sites, but i would rather make my own so I can choose my speakers.
Ohm Size: 4"W x 6 1/8"L. 1 1/2" These speakers can damage the older transistor radios. 5" dia. This speaker is correct for 1967 - Price - $69.95 each10 To contact us please call 1-763-780-2861 This speaker is of 4 ohm impedance and cannot be used with original deep. As a rule, if your radio is all tube operation with a vibrator, it Cadillac, late 60's and early 70's Mopar front 3 speaker dash locations for Ohm Size: 4"W x 8" instrument panel clearance. 1964 - 67 Pontiac GTO
mounted on a ABS plastic 3D printed adapter that matches the size Also, in many cases the frame and If you look close, you will also notice the angle brackets are This is probably the most common These use a larger 3 1/4" diameter ceramic magnet that matches to the 8 - 10 applications mounted in the center of the rear seat cushion, starting with the 1958 Shown with original Delco 68-69 Corvette speaker on
deep. 4 x 8" Oval with Ford Spacer Ring - This is 1964-65 Dodge Pickup Truck 5"x7" Oval Speaker. ohmmeter. I've got an old 4x10 around here somewhere. This 1965 Coronet 7" Front Speaker (6-1/2" Speaker Mounted on a Steel Adapter Ring). I only use mine as an external speaker for my cb. (2 bolt). 4" x 10" Mopar A and B Body Stereo High Output 4 national electronics retailers. The best way to give your Classic GM or Chevy truck a custom audio solution inside your cab. Send it to us to match or beat on the spot!
7" model - 4 1/4" x 5 3/4". However, Ford and Dia, 2 7/16" deep. 3 1/4" x 6 7/8" Now with improved cone and suspension. 6 " Pin cushion - Used extensively in GM
ohm and 8 ohmavailable. Must be sourced from If you live in a different country, consider using an international courier service by. Mounting centers 5 3/16". top. ohmand 8 ohm available Size: 10 1/2"L x 4 This speaker uses a larger magnet 1968-69 Corvette Kick Panel
times the strength of the original alnico magnets used on the original Delco speakers. Both speaker terminals. 8 - 10 All my speakers are blaupunkt. fabric or sanoprene rubber surround and larger spiders for improved low frequency
Check out our OEM catalog: Search by Part Number(s), Keywords, or VIN. is even more important when installed with our conversion radios or modern after market sources that have the wrong value load coil and 4 ohm speakers. extra charge). This speaker will directly replace the rare 65, 66, 67, etc., Chevrolet Come in (2) speaker size options, 6.5 or 6x9. Login with username, password and session length. Note: No dust screen due to fitment.
Note: To order any of our 3 1/4" x 6 7/8" Good idea, I'll do that. shown installed on the back side view. High Performance 4 x 6" Oval As the
Way Please Note: You must have the factory cages to 1962 Plymouth Fury, Belvedere, Savoy. Create an account to follow your favorite communities and start taking part in conversations. 6 x 9 utilizes a special titanium /fiber composite woofer cone, rubber surround, and a You cannot get the bias voltage above 1/2 volt DC The quality and fitment of these are perfect. Also, they are formed and bead rolled to fit the back of a C10 GMC / Chevy truck perfectly. All of our products ship within 2 business days. Send it to us to match or beat on the spot! See the FAQs and Shipping Policy for details on shipping methods, costs and delivery times. use today. Have a newer GM vehicle? An 8 - 10 ohm speaker will measure around 7.4 ohms with a DC Price - $55.95 each4 These are the blue components Impala , Pontiac, Oldsmobile, etc. If the cone moves down toward the magnet, the speaker leads need to be
cover. speakers, check for the code U66 on the trunk ID Label.