Standard safety glasses are not impervious to all impacts. Avoid using paper towels, which can easily scratch the face shield. welding face shield helmet 51mm bulk lift pack safety cigweld safetycare Avoid using household cleaners that contain ammonia or products formulated to clean glass surfaces. Ballistic face shields come in several different protection levels depending on the materials used to construct them. Provides a higher degree of overall protection. A 70% alcohol wipe will also disinfect and keep plastic surfaces clear, but it is critical to first wash the face shield to remove the bioburden prior to disinfecting. For over 45 years, MCR Safety has proven to be a world-leader in gloves, glasses, and garments. Visit www.mcrsafety.com/privacy for MCR Safety's privacy policy. 
ACCESS 
Can we get to know each other? Keep in mind, neither should be used for welding. It is important to note: tinted shields offer reduced luminous transmittance, so workers could be exposed to increased levels of UV and IR radiation due to pupillary dilation. Individual Max 6 face shields are now available, part number 181540PF. Knoxville, TN 37996 Find Us Main phone:865-974-5084 Fax:865-974-0094 welding helmet lift protection face protective personal equipment darkening long sleeves) Welding helmet with the appropriately tinted sight glass. Cotton heavy drill long pants and long sleeve shirts Safety boots with spatsNEVER look toward the welding area unless you are wearing eye protection of the required tint. Our 104PF delivers. In this blog, we are going to highlight all the fundamentals for face shields that users should consider before making a purchase: standards, hazards, industries, types of materials, and some of our top-selling styles. Safety+Health further describes the standards categorization of primary and secondary protection, as well as face shields: Again, it is important to note that according to the current ANSI standards, face shields are considered secondary protection, requiring the use of protective eyewear or goggles as well. welding mask face For example, face shields, along with safety goggles, are required when filling/dispensing liquid nitrogen. Natural curved shield: face shield is naturally curved rather than comprised of individual folded face shields. Need more information? Face shields are a standard piece of personal protective equipment for welders, who use them as a means of protection from radiant energy (heat and light). The American National Standards Institute (ANSI) has written a standard defining criteria for face shields: ANSI Z87.1-2015, the American National Standard For Occupational And Educational Personal Eye And Face Protection Devices. Eye and face PPE must be marked to identify the manufacturer and the ANSI Z87 standard marking on the frame. Note: There are face shields with an ANSI approved goggles assembly available (example. face helmet shield china safety welding handyman protective It is a naturally transparent, amorphous thermoplastic with applications beyond eyewear lenses. Safety glasses do not prevent liquids from entering into the eyes from a splash to the face. A face shield is frequently used in medical applications to protect the face and eyes from the splattering or splashing of biohazardous fluids. (BYLAW 7334, 2009). If the manufacturers instructions are not available, clean with a mild soap and water solution and rinse thoroughly and allow to air dry. It comes with impressive high-end functionality, including a Max 6 lens that provides 6X greater anti-fog performance than the average lens. Class 6 eyewear refers exclusively to face shields, which are considered appropriate for all contexts except those that require large reductions of optical radiation or protection from laser radiation. For optimal protection, the shield should extend below the chin anteriorly, to the ears laterally, and there should be no exposed gap between the forehead and the shields headpiece. Follow the manufacturers instructions for cleaning specialty face shields. Rinse the shield in clear water and dry with a soft cotton towel or a microfiber cloth. face welding shield visor helmet mask babydream1 windproof protective proof impact screen outdoor shields The strengths of each material should be taken into account when making a selection, in order to provide the best overall solution for different applications workers encounter. Routinely check face shields for damage, and do not wear a face shield that has sustained damage. Face shields may be tinted or metal coated for heat protection. In accordance with ANSI Standard Z87.1-2015, face shields used in conjunction with safety glasses or goggles provide superior protection against a variety of hazards, including splashes from chemical or biological agents, glare, sparks, and flying debris. Companies affiliated with GlobalSpec can contact me when I express interest in their product or service. In this section, were going to talk in-depth about three of the materials that MCR Safety uses in its face shields: acetate, PETG, and polycarbonate. Cutting and grinding applications are common places for tinted face shields to be used. Welding helmets do not protect against head impact hazards except the face. An error occurred while processing the form.
The shield assemblies consist of vulcanized fiber or glass-fiber body, a ratchet or button type adjustable headgear or cap attachment, and a filter and cover plate holder. Environmental Health & Safety Public Safety, Temporary Location until August 15, 2022: Subscribe and stay up to date on what's happening within the safety industry. Welding helmets should only be used over primary eye protection (i.e. When large objects and/or objects traveling at high rates of speed strike face shields, the visor may break or be compromised and cause injury to the wearers face or eyes. Supporting the LGBTQS2+ in the workplace, WIS Show: The Progression of Women in Safety Panel, How to Manage Heat Stress in Open Pit Mining Operations, How to Handle Heat Stress on the Construction Site, Electrolytes: What They Are and Why They Matter for On-the-Job Hydration, Safety Talks #18 - Heat Stress Preparedness, A Primer on the Noise Reduction Rating (NRR), Safety Benefits of Using Sound Masking in the Office, Protecting Your Hearing on the Job: The 5 Principles of Hearing Protection, Safety Talks #5 - Noise Exposure: Evolving Legislation and Recent Court Actions with Andrew McNeil, 4 Solutions to Eliminate Arc Flash Hazards in the Workplace, 5 Leading Electrical Hazards and How to Avoid Them, 7 Things to Consider Before Entering a Confined Space, How to Properly Measure Contractor Engagement, Measuring Actions (Not Documents) for Better Trade Partner Engagement, 7 Supply Chain Risks You Need to Anticipate and Manage, The 3 Key Classes of Safety Visibility Apparel (And When to Use Them), Work Boots and Shoes Specifically Designed for Women Matter - Here's Why, Staying Safe from Head to Toe: Complete Arc Flash Protection, How to Select the Right Hand Protection for Chemical Hazards, Cut-Resistant Leather Gloves: How to Choose What's Best for You, Safety Glove Materials: What They Mean and What to Look For, Protective Clothing for Agricultural Workers and Pesticide Handlers, How to Stay Safe When Spray Painting and Coating, Detecting, Sampling, and Measuring Silica on Your Job Site, An Overview of Self-Retracting Fall Protection Devices, How to Buy the Right Safety Harness for Your Job, How to Put Together a Safety Program for Working at Heights, 4 Steps to Calculating Fall Arrest Distance, How to Select the Right Respirator for Confined Space Work, How to Safely Rescue Someone from a Confined Space, Creating a Confined Space Rescue Plan: Every Step You Need, The Equipment You Need for a Confined Space Rescue, The Real Reason Employees Hate Safety Programs. Face shield protection is a must. Whether its on the shop floor, an oil rig, or a construction site, we are there providing solutions to workplace hazards. Chin and side of face protection: extra coverage and protection from flying metal chips or splashing chemicals. General use face shields do not need to meet ANSI standards and may be worn as voluntary use. Refineries: Working during turnarounds involves cutting metal and painting with solvents. CR4 CommunityBulletproof Shields for Police? Head guards are often rated for electrical insulation to reduce risk of electrocution. Addressing Safety Challenges in Clean Room Environments, workplace hazards that require the use of a face shield, potentially entering the body through the eyes, customs agents and other high-contact transportation workers, Hard Hats, Faceshields, and More - Work Safely Every Day, Major Safety Concerns for Welders and What to Do About Them, It's Not Just Gloves: What You Need to Know About Welding Apparel, First Aid for Chemical Exposure Incidents. If there are an insufficient number of face shields available for each person to be assigned their own face shield, be sure to clean and disinfect your face shield before sharing with another person. | HR and Safety Manager, By: Pete Nemmers, CSM This may shorten the usable life span or your face shield. A face shield is a type of personal protective equipment (PPE) designed to protect the wearer from specific hazards that may affect the face. By submitting this form I consent for MCR Safety to contact me for business and marketing purposes at the phone and/or email I provided via physical and/or automated methods. It is important to note: tinted shields offer reduced luminous transmittance, so workers could be exposed to increased levels of UV and IR radiation due to pupillary dilation. Landscaping: Dust, flying rocks, sticks, and tree branches are always close by, meaning workers need the entire face protected. When they are worn for protection against UV light, face shields must be specifically designed to protect the face and eyes from hazardous radiation. The definitive shut-down and transition to a surveillance phase of a radioactive waste disposal installation are subject to authorisation. Headgear with integrated 1-piece molded clear face shield: ease of being all-in one GlobalSpec will retain this data until you change or delete it, which you may do at any time. A typical face shield consists of a headband that holds the shield onto the wearers head, as well as a flat or curved barrier (the shield) that prevents hazards from reaching the wearer. Face shields may be worn voluntarily as a general personal protective piece of equipment, or they may be required personal protective equipment based upon a hazard assessment of the job task to be performed. darkening prosafe Welding shields protect both the eyes and face from flying sparks, metal spatter and slag chips produced during welding, brazing, and soldering. PETG is great for face shields because: 181640 is one of MCR Safetys top-selling PETG face shields. faceshield esmerilar lincolnelectric Boarding home means a privately owned and operated home for the boarding and lodging of individuals which is approved by the Department of Juvenile Justice or the cabinet for the placement of children committed to the department or the cabinet; Green building strategies means those strategies that minimize the impact of development on the environment, and enhance the health, safety and well-being of residents by producing durable, low-maintenance, resource-efficient housing while making optimum use of existing infrastructure and community services. Safeopedia Inc. - Optical clarity in a plastic shield is critical. They may also be worn over goggles. Better optical quality: steel tool polished, meaning excellent visibility and no distortion. We Protect People! However, polycarbonate has numerous benefits that make it a particularly great choice for safety eyewear: 181540 is one of MCR Safetys top-selling polycarbonate face shields. Liu D, Wong H, Quinlan P, Blanc PD (1995) Welding helmet airborne fume concentrations compared to per- sonal breathing zone sampling. They are: A simple alcohol wipe or rinse with soap and hot water is all it takes for the shields to be contaminant-free again. For use of eye protection around lasers please refer to the, Electrical PPE for the eyes is covered in. clip-on or slide-on shields) are acceptable if they meet the ANSI requirements. 201 Andy Holt Tower Without one, the light and heat emitted from many welding activities can very quickly damage a welders eyes or skin. GlobalSpec 2022 All Rights Reserved. Many jurisdictions categorize face shields as one of several types of protective eyewear. Flying metal shards are a concern when cutting metal. Add a mild liquid dish detergent, like Dawn, to reduce surface tension, and allow the soapy water to evenly disperse across the surface. The flagship campus of the University of Tennessee System and partner in the Tennessee Transfer Pathway. Safety eyewear can be purchased that incorporates prescription vision correction in the design. Railroads: Maintenance workers in service, repair, and mechanical facilities require face shields from flying projectiles. By submitting this form I consent for MCR Safety to contact me for marketing purposes at the email I provided via manual and/or automated methods. Safety eyewear can be worn over prescription lenses and should not disturb the proper position of other safety apparel. Certificates: What's the Difference? I understand I have the option to opt-out at any time. Tell us a little bit about you and we'll get right back to you to answer all your questions. General use face shields are not a replacement for a face covering, but rather shall be worn together with a face covering. Tinted face shields are usually used in situations where anti-glare lenses are necessary, like working on pipelines in the sun or on a construction site outdoors. Remember soap and water removes microbes on our hands, so it will work on your face shield as well. Ratchet action adjustment: easy-to-adjust headband ensures comfort and ease of wear. :TANGEDCO: Specn.No:CE / MTPS-I / SE / M-I / MP / OT. Class 6 eye protection comes in three variants (page 11-3): In the context of biological protection and COVID-19 protection in particular, face shields are commonly used in hospitals and other settings that expose workers to a high enough risk of exposure that the use of a respirator (e.g., an N95 mask) by itself does not offer sufficient protection against the contagion. Damaged or broken equipment should be discarded. SnName Of The Plant UnitLife Saving Equipment Installed Or Used1SMS & Rolling MillFlame retardant dress, Safety Shoes, Helmet ,leather Gloves, Welding helmet, Nose mask ,Ear buds. earthed or connected with earth means connected with the general mass of earth in such manner as to ensure at all times an immediate discharge of energy without danger. By clicking sign up, you agree to receive emails from Safeopedia and agree to our Terms of Use & Privacy Policy. Building Hours mean 7:00 a.m. to 6:00 p.m., Monday through Friday, excluding the day of observation of New Years Day, Presidents Day, Memorial Day, Independence Day, Labor Day, Thanksgiving Day, Christmas Day, and, at Landlords discretion, any other locally or nationally recognized holiday that is observed by other buildings comparable to and in the vicinity of the Building (collectively, Holidays). Choose Yours, WIS Show: Step it up! Behavior-Based Safety - Can it Really Make a Difference? Together with safety eyewear, a face shield can provide comprehensive protection for your entire face. Depending on the type used, a face shield may protect its wearer from a physical hazard, energy or radiation, chemical splashes, or biological hazards.
Face shields are commonly used in: Face shields typically cover the entire face and are secured over or around the head with an adjustable band. No matter your industry, we have the personal protection equipment you need.
ACCESS Can we get to know each other? Keep in mind, neither should be used for welding. It is important to note: tinted shields offer reduced luminous transmittance, so workers could be exposed to increased levels of UV and IR radiation due to pupillary dilation. Individual Max 6 face shields are now available, part number 181540PF. Knoxville, TN 37996 Find Us Main phone:865-974-5084 Fax:865-974-0094 welding helmet lift protection face protective personal equipment darkening long sleeves) Welding helmet with the appropriately tinted sight glass. Cotton heavy drill long pants and long sleeve shirts Safety boots with spatsNEVER look toward the welding area unless you are wearing eye protection of the required tint. Our 104PF delivers. In this blog, we are going to highlight all the fundamentals for face shields that users should consider before making a purchase: standards, hazards, industries, types of materials, and some of our top-selling styles. Safety+Health further describes the standards categorization of primary and secondary protection, as well as face shields: Again, it is important to note that according to the current ANSI standards, face shields are considered secondary protection, requiring the use of protective eyewear or goggles as well. welding mask face For example, face shields, along with safety goggles, are required when filling/dispensing liquid nitrogen. Natural curved shield: face shield is naturally curved rather than comprised of individual folded face shields. Need more information? Face shields are a standard piece of personal protective equipment for welders, who use them as a means of protection from radiant energy (heat and light). The American National Standards Institute (ANSI) has written a standard defining criteria for face shields: ANSI Z87.1-2015, the American National Standard For Occupational And Educational Personal Eye And Face Protection Devices. Eye and face PPE must be marked to identify the manufacturer and the ANSI Z87 standard marking on the frame. Note: There are face shields with an ANSI approved goggles assembly available (example. face helmet shield china safety welding handyman protective It is a naturally transparent, amorphous thermoplastic with applications beyond eyewear lenses. Safety glasses do not prevent liquids from entering into the eyes from a splash to the face. A face shield is frequently used in medical applications to protect the face and eyes from the splattering or splashing of biohazardous fluids. (BYLAW 7334, 2009). If the manufacturers instructions are not available, clean with a mild soap and water solution and rinse thoroughly and allow to air dry. It comes with impressive high-end functionality, including a Max 6 lens that provides 6X greater anti-fog performance than the average lens. Class 6 eyewear refers exclusively to face shields, which are considered appropriate for all contexts except those that require large reductions of optical radiation or protection from laser radiation. For optimal protection, the shield should extend below the chin anteriorly, to the ears laterally, and there should be no exposed gap between the forehead and the shields headpiece. Follow the manufacturers instructions for cleaning specialty face shields. Rinse the shield in clear water and dry with a soft cotton towel or a microfiber cloth. face welding shield visor helmet mask babydream1 windproof protective proof impact screen outdoor shields The strengths of each material should be taken into account when making a selection, in order to provide the best overall solution for different applications workers encounter. Routinely check face shields for damage, and do not wear a face shield that has sustained damage. Face shields may be tinted or metal coated for heat protection. In accordance with ANSI Standard Z87.1-2015, face shields used in conjunction with safety glasses or goggles provide superior protection against a variety of hazards, including splashes from chemical or biological agents, glare, sparks, and flying debris. Companies affiliated with GlobalSpec can contact me when I express interest in their product or service. In this section, were going to talk in-depth about three of the materials that MCR Safety uses in its face shields: acetate, PETG, and polycarbonate. Cutting and grinding applications are common places for tinted face shields to be used. Welding helmets do not protect against head impact hazards except the face. An error occurred while processing the form. 
The shield assemblies consist of vulcanized fiber or glass-fiber body, a ratchet or button type adjustable headgear or cap attachment, and a filter and cover plate holder. Environmental Health & Safety Public Safety, Temporary Location until August 15, 2022: Subscribe and stay up to date on what's happening within the safety industry. Welding helmets should only be used over primary eye protection (i.e. When large objects and/or objects traveling at high rates of speed strike face shields, the visor may break or be compromised and cause injury to the wearers face or eyes. Supporting the LGBTQS2+ in the workplace, WIS Show: The Progression of Women in Safety Panel, How to Manage Heat Stress in Open Pit Mining Operations, How to Handle Heat Stress on the Construction Site, Electrolytes: What They Are and Why They Matter for On-the-Job Hydration, Safety Talks #18 - Heat Stress Preparedness, A Primer on the Noise Reduction Rating (NRR), Safety Benefits of Using Sound Masking in the Office, Protecting Your Hearing on the Job: The 5 Principles of Hearing Protection, Safety Talks #5 - Noise Exposure: Evolving Legislation and Recent Court Actions with Andrew McNeil, 4 Solutions to Eliminate Arc Flash Hazards in the Workplace, 5 Leading Electrical Hazards and How to Avoid Them, 7 Things to Consider Before Entering a Confined Space, How to Properly Measure Contractor Engagement, Measuring Actions (Not Documents) for Better Trade Partner Engagement, 7 Supply Chain Risks You Need to Anticipate and Manage, The 3 Key Classes of Safety Visibility Apparel (And When to Use Them), Work Boots and Shoes Specifically Designed for Women Matter - Here's Why, Staying Safe from Head to Toe: Complete Arc Flash Protection, How to Select the Right Hand Protection for Chemical Hazards, Cut-Resistant Leather Gloves: How to Choose What's Best for You, Safety Glove Materials: What They Mean and What to Look For, Protective Clothing for Agricultural Workers and Pesticide Handlers, How to Stay Safe When Spray Painting and Coating, Detecting, Sampling, and Measuring Silica on Your Job Site, An Overview of Self-Retracting Fall Protection Devices, How to Buy the Right Safety Harness for Your Job, How to Put Together a Safety Program for Working at Heights, 4 Steps to Calculating Fall Arrest Distance, How to Select the Right Respirator for Confined Space Work, How to Safely Rescue Someone from a Confined Space, Creating a Confined Space Rescue Plan: Every Step You Need, The Equipment You Need for a Confined Space Rescue, The Real Reason Employees Hate Safety Programs. Face shield protection is a must. Whether its on the shop floor, an oil rig, or a construction site, we are there providing solutions to workplace hazards. Chin and side of face protection: extra coverage and protection from flying metal chips or splashing chemicals. General use face shields do not need to meet ANSI standards and may be worn as voluntary use. Refineries: Working during turnarounds involves cutting metal and painting with solvents. CR4 CommunityBulletproof Shields for Police? Head guards are often rated for electrical insulation to reduce risk of electrocution. Addressing Safety Challenges in Clean Room Environments, workplace hazards that require the use of a face shield, potentially entering the body through the eyes, customs agents and other high-contact transportation workers, Hard Hats, Faceshields, and More - Work Safely Every Day, Major Safety Concerns for Welders and What to Do About Them, It's Not Just Gloves: What You Need to Know About Welding Apparel, First Aid for Chemical Exposure Incidents. If there are an insufficient number of face shields available for each person to be assigned their own face shield, be sure to clean and disinfect your face shield before sharing with another person. | HR and Safety Manager, By: Pete Nemmers, CSM This may shorten the usable life span or your face shield. A face shield is a type of personal protective equipment (PPE) designed to protect the wearer from specific hazards that may affect the face. By submitting this form I consent for MCR Safety to contact me for business and marketing purposes at the phone and/or email I provided via physical and/or automated methods. It is important to note: tinted shields offer reduced luminous transmittance, so workers could be exposed to increased levels of UV and IR radiation due to pupillary dilation. Landscaping: Dust, flying rocks, sticks, and tree branches are always close by, meaning workers need the entire face protected. When they are worn for protection against UV light, face shields must be specifically designed to protect the face and eyes from hazardous radiation. The definitive shut-down and transition to a surveillance phase of a radioactive waste disposal installation are subject to authorisation. Headgear with integrated 1-piece molded clear face shield: ease of being all-in one GlobalSpec will retain this data until you change or delete it, which you may do at any time. A typical face shield consists of a headband that holds the shield onto the wearers head, as well as a flat or curved barrier (the shield) that prevents hazards from reaching the wearer. Face shields may be worn voluntarily as a general personal protective piece of equipment, or they may be required personal protective equipment based upon a hazard assessment of the job task to be performed. darkening prosafe Welding shields protect both the eyes and face from flying sparks, metal spatter and slag chips produced during welding, brazing, and soldering. PETG is great for face shields because: 181640 is one of MCR Safetys top-selling PETG face shields. faceshield esmerilar lincolnelectric Boarding home means a privately owned and operated home for the boarding and lodging of individuals which is approved by the Department of Juvenile Justice or the cabinet for the placement of children committed to the department or the cabinet; Green building strategies means those strategies that minimize the impact of development on the environment, and enhance the health, safety and well-being of residents by producing durable, low-maintenance, resource-efficient housing while making optimum use of existing infrastructure and community services. Safeopedia Inc. - Optical clarity in a plastic shield is critical. They may also be worn over goggles. Better optical quality: steel tool polished, meaning excellent visibility and no distortion. We Protect People! However, polycarbonate has numerous benefits that make it a particularly great choice for safety eyewear: 181540 is one of MCR Safetys top-selling polycarbonate face shields. Liu D, Wong H, Quinlan P, Blanc PD (1995) Welding helmet airborne fume concentrations compared to per- sonal breathing zone sampling. They are: A simple alcohol wipe or rinse with soap and hot water is all it takes for the shields to be contaminant-free again. For use of eye protection around lasers please refer to the, Electrical PPE for the eyes is covered in. clip-on or slide-on shields) are acceptable if they meet the ANSI requirements. 201 Andy Holt Tower Without one, the light and heat emitted from many welding activities can very quickly damage a welders eyes or skin. GlobalSpec 2022 All Rights Reserved. Many jurisdictions categorize face shields as one of several types of protective eyewear. Flying metal shards are a concern when cutting metal. Add a mild liquid dish detergent, like Dawn, to reduce surface tension, and allow the soapy water to evenly disperse across the surface. The flagship campus of the University of Tennessee System and partner in the Tennessee Transfer Pathway. Safety eyewear can be purchased that incorporates prescription vision correction in the design. Railroads: Maintenance workers in service, repair, and mechanical facilities require face shields from flying projectiles. By submitting this form I consent for MCR Safety to contact me for marketing purposes at the email I provided via manual and/or automated methods. Safety eyewear can be worn over prescription lenses and should not disturb the proper position of other safety apparel. Certificates: What's the Difference? I understand I have the option to opt-out at any time. Tell us a little bit about you and we'll get right back to you to answer all your questions. General use face shields are not a replacement for a face covering, but rather shall be worn together with a face covering. Tinted face shields are usually used in situations where anti-glare lenses are necessary, like working on pipelines in the sun or on a construction site outdoors. Remember soap and water removes microbes on our hands, so it will work on your face shield as well. Ratchet action adjustment: easy-to-adjust headband ensures comfort and ease of wear. :TANGEDCO: Specn.No:CE / MTPS-I / SE / M-I / MP / OT. Class 6 eye protection comes in three variants (page 11-3): In the context of biological protection and COVID-19 protection in particular, face shields are commonly used in hospitals and other settings that expose workers to a high enough risk of exposure that the use of a respirator (e.g., an N95 mask) by itself does not offer sufficient protection against the contagion. Damaged or broken equipment should be discarded. SnName Of The Plant UnitLife Saving Equipment Installed Or Used1SMS & Rolling MillFlame retardant dress, Safety Shoes, Helmet ,leather Gloves, Welding helmet, Nose mask ,Ear buds. earthed or connected with earth means connected with the general mass of earth in such manner as to ensure at all times an immediate discharge of energy without danger. By clicking sign up, you agree to receive emails from Safeopedia and agree to our Terms of Use & Privacy Policy. Building Hours mean 7:00 a.m. to 6:00 p.m., Monday through Friday, excluding the day of observation of New Years Day, Presidents Day, Memorial Day, Independence Day, Labor Day, Thanksgiving Day, Christmas Day, and, at Landlords discretion, any other locally or nationally recognized holiday that is observed by other buildings comparable to and in the vicinity of the Building (collectively, Holidays). Choose Yours, WIS Show: Step it up! Behavior-Based Safety - Can it Really Make a Difference? Together with safety eyewear, a face shield can provide comprehensive protection for your entire face. Depending on the type used, a face shield may protect its wearer from a physical hazard, energy or radiation, chemical splashes, or biological hazards.
Face shields are commonly used in: Face shields typically cover the entire face and are secured over or around the head with an adjustable band. No matter your industry, we have the personal protection equipment you need.