If water continuously rises and flows out of the inner chamber it is an indication the valve is leaking and may need to be replaced.) 
Remove the old valve and compression sleeve. Level Control Valves. All you have to do is to put in the new valve. 
3. Made from glass-filled thermoplastic and stainless steel. This valve is the replacement of the traditional float ballcock, which can be applied to various systems of high water tanks, pools, water towers of the industry and civil construction, etc. The product will be reserved for you when you complete your order. Find My Store. Cla-Val Pacific manufactures several different types of level control valves. To access this gasket, remove the 6 to 8 screws on the valve cover. This level controller was designed to complement a single solenoid-operated/override control valve and 4-20-mA level sensor or high/low level switches. Quality repairs using original spare parts ensure that your valves meet their original specifications after maintenance and will reach their maximum lifetime.
The Level Control Panel with Touch Panel interface designed by Singer Valve was created to accomplish optimum level control feasibility and flexibility. Replace the cap snuggly onto the chamber with hand pressure. Distributor of water level control valves. 5. Call today! This control has a small 12V coil relay whose contacts are rated at 10A 120V. Turning the valve to the left or counter clockwise, it will begin to loosen. When the pool or tank water levels fall, the valve body will sink down and then the forerunner of the control valve will be opened. have been calculated for cavitating control valve applications involving water. (3) Getting a ' Leaking Shut Off Valves ' to stop can be a challenge. These non-throttling valves remain fully open until the pre-set shut-off point is reached. This will expose the packing nut completely. Features This valve is the replacement of the traditional float ballcock, which can be applied to various systems of high water tanks, pools, water towers of the industry and civil construction, etc. For instance, elevated aluminum levels in your elevators hydraulic tank can indicate wear on your pump housing. The distance for the motor to turn off and on needs to be specified. Bending the brass rod (up or down) or turning the adjusting screw at the top of the diaphragm cover is all you need to do to change the level of water in the tank. Liquid Level Control Valves. Automatic control, low self-complementary water, water full automatic stop Four intakes, large volume of water Beautiful appearance, small size, practical, simple installation Without Turn off the power to the leaking water heater. Next, shut off the water pressure to the tank. Tighten loose pipe fittings. Adjust the water temperature if the leak issues from the TPR valve. Test the pressure in the cold water supply. Replace a leaky drain valve. Replace the water heater if the leak is at the bottom of the tank. https://www.balkanplumbing.com/water-valve-replacement-repair-guide Regular maintenance enhances the life of your valves, requiring fewer replacements and cutting the level of repair work required during the valves useful life. Fluidmaster. Our service technicians and engineers are experienced, well trained and follow ISO 9001-certified processes at all our global service centers or while on assignment at your production plants. The control valve manipulates a flowing fluid, such as gas, Step 3 Remove the Handle and Install New Washer .
352 results for automatic water level control valve. Thermal cycling. It is a liquid level control valve that can generate a multi-point switch Use pliers to carefully rotate it and remove it from the pipe, then slide off the compression nut. Newer toilets will have variations of a vertical post that is in the corner of the toilet. Step 1: Proposed Control Slide Show The slide show included in this instructable shows the basic operating theory behind this control.
1. Touch the other ohmmeter probe to the terminal P. 5. Such applications occur in municipal water, rural
If you notice a control valve leaking internally, first check the maximum allowable leakage (MAL) specified by ANSI/FCI Standard 70-2. 28 products. Valve cover o-rings rarely go bad over time. Not all control valves are designed to be bubble-tight. to 3 in. Available in pipe sizes from 3/4 in. for pricing and availability. Turn the controller to manual and start the system watering. https://cascadeautomation.com/control-valve-repair-explained Liquid level control valves maintain constant pressure and operate automatically for accurate flow control in corrosive and ultra-pure liquid applications.
Turn the water back on, open the repaired water valve and check for leaks.
The Emerson Control Valve Handbook, 4th Update your shipping location. They are equipped with separate adjustable opening and closing speed controls. As the pipe water pressure affects, the seal face of control (2) A large percentage of valves have washers in them. ' There are a lot of capacitors, circuit boards, resistors, and semiconductors used. 3) The results of an oil analysis. Use an adjustable wrench to disconnect the lines connecting with the gas control valve. STEP 4: Turn the top of the valve clockwise to lock it in place. It will have a float attached to it that controls the water that is allowed in the tank. Getting the water level right is important. Add Tip Ask Question If the valve is set too high, turn off the water supply and flush the toilet. Products [31] 3/8" OD Black Tubing sold by Foot $0.40 Add To Cart 3/8c x 3/8c Elbow $2.95 Add To Cart Control valve leaks internally Control valves may leak internally for several reasons. Variations include one-way flow with delayed opening, one-way flow with pressure sustaining, and two-way flow designs. If you see a hexagonal (6-sided) nut, you'll know you have a compression valve.A threaded valve will have 2 to 6 flat sides where it meets the supply line. These flat sides allow you to remove the valve with a pipe wrench.If you have a sweat valve, you'll be able to see where the valve body is soldered, or melted, into the water supply line. Step 1: If your water softener has an electronic control head is it lit up and working? This valve helps control the water overflow. Discover how control valves are used to maintain operating conditions such as flow, pressure, temperature, and liquid level. Save this search. A counterclockwise turn of this crew raises the level of water while a clockwise turn lowers it. Our float valves directly control the maximum water level and our altitude valves control water levels from ground level. ANSI/FCI Standard 70-2 divides control valves into six different leak rate classifications and defines the maximum allowable leakage (MAL) for each. Because we hate overflow as much as you do. Ultrasonic Level Sensor Working Principle: This water level controller will use two components the ultrasonic sensor and relay board. The float level control valve has the function of automatically opening and closing the pipeline to control the water level. Deviation thus created is fed to the P + I controller. If not, the water level switch is bad and needs to be replaced. There will be a valve in the main water supply that you can turn to shut off the water that is being supplied to this water control valve. When You Need to Repair Your Control Valve 1. The first is that they arent actually designed to shut off 100%. Only angle-globe valves can be used for a 90-degree change in direction of flow.Check valves (other than the stop-check valves) stop flow only in one (reverse) direction. Some designs of ball-and-plug valves (contact the valve manufacturer) are suitable for throttling service.More items The water level is maintained by the use of a high precision pilot level control valve that accurately detects the height of the water level from a detection point at the bottom of the tank and controls the main fill valve accordingly. Altitude Valve: What is it. Residential, commercial, high performance, mechanical and hot water control valves. Once again, you will use your pipe wrench to unthread the old valve. However, we recommend replacing the o-ring if its damaged or broken. Peel the o-ring out, clean the groove, lubricate the new o-ring, and reinstall the cover.
Float Switches. Set the ohmmeter scale to the lowest ohms setting and ZERO the meter. Automatic Water Level Control Valve For Water Tank Water Tower Internal leakage.
Vibration of the valve assembly. 3. With the compression nut loosened, simply pull the old valve off of the pipe. Once the water supply is turned off, remove the handle from the stem. Specification: Material: ABS Plastic Color: Cream Type: 3/4" inlet Connection: Male thread Structure: floating ball Nominal Diameter: 20 (mm) Suitable medium: water Pressure environment: atmospheric Working temperature: high temperature Flow direction: one-way Drive: hydraulic control Both sides of the diameter: 2.4cm Size: 10.2x5.8x8.6cm/4.02 x 2.28 x 2.39"(L STEP 3: Adjust the height of the valve by twisting the top half of the valve counterclockwise and push down on the valve until the corner of the fill valve cover lines up with the top of the flush valve.
There are (3) Topics associated with this repair. Altitude control valves are automatic control valves used for controlling water levels in tanks and elevated storage reservoirs. As pioneers in water supply protection and efficiency, our proven water & control management solutions include state-of-the-art hydraulic control valves, air valves and advanced water meters. This video describes how to repair irrigation valves used in lawn irrigation systems. Of course, there are times when repair becomes necessary. Output of the controller is used to throttle 400A Universal Toilet Fill Valve with Brass Shank. Repairing Washered Shut Off Valves ' covers this topic. First, shut off the water supply. Step 5: Removing the Old Valve. Put in the new valve. Types include manual, automatic, diaphragm, solenoid operated and filter valves. If not, check to see if its plugged in or the breaker feeding it is tripped. Were the ones who help the pros. Remove the old washer and slide on the new one. Improper maintenance. This can be difficult, it will take some effort to get the old valve to loosen. Hi everyone, this is zavardy and this time ill be doing unboxing video for automatic water level control valve. Valve Recommendation Valve Replacement - Lower Cost HS-Valves Backwash Only Valve Replacement Options Water Softener Valve Replacements 5 year manufacturer parts warranty, owners/service manual, and 7 days a week technical support included. Touch and hold one ohmmeter probe to the terminal V. 4. 2. Add Tip. Repeatable, reliable operation each and every time! Reinstall the packing nut, tighten lightly with a wrench (dont over tighten at this or any other point) and reattach the handle. How Level Control Valves Work. Level control valves are used to maintain liquid levels for different process equipment such as - Vessels, distillation column bottom section, distillation column side liquid draw, etc. Liquid (or interface liquid) is in physical contact with gas or other liquid phase. Liquid is taken out from unit operations . Note: Product availability is real-time basis and adjusted continuously. You need to have an arsenal of information at the ready to ensure you get the right type, size, and characteristics for your application. Step 2: Check to make sure that your systems bypass valve has not been activated. It assumes that the pump is a small plug-in pump. (1) There are ' Different Types of Shut Off Valves ', knowing what type you have will aid in fixing it. with various end connections. Our level control valves are the ideal solution for preventing overflow in tanks, towers and reservoirs. In particular, our technicians are called out to job sites for four main reasons. No substance known is able to continuously withstand this form of abuse, meaning that cavitation will destroy any control valve given enough time. Elevator valve problems could be indicative of other issues with your elevator. 1/2 inch float valve, the water level control box is an upgraded version of the traditional float valve, used in swimming pools, livestock tanks, aquaculture, aquariums 146 $1399$14.99 Save 5% with coupon Get it as soon as Mon, Mar 28 FREE The ohmmeter should show ZERO resistance (continuity). An Altitude Valve is a mechanically operated control that relies on a differential of pressure between inlet and outlet to assume a Description: This valve is the replacement of the traditional float ballcock, which can be applied to various systems of high water tanks, pools, water towers of the industry and civil construction, There is a special program that executes the sensor. All of these seals have a seal oil inlet at a differential pressure above the reference gas pressure; however the bushing seal (Fig. Our float control valves are applicable anywhere it is necessary to automatically maintain the water level in storage tanks or reservoirs. The measured value is compared with the normal set value of the heater. Altitude Control. Pressure estimates as high as 1500 newtons per square millimeter (1.5 giga-pascals, or about 220000 PSI!)
It can save more than 60% water. The water level in the tank should be adjusted so that it is near the top of the fill tube in the center of the toilet. This may seem like a silly step but it The level of water in the tank could be too low or too high either because of improper settings or because of clogging or even leaks in several controls that we discuss beginning at BRINE TANK DIAGNOSIS & REPAIR - home. This water level control valve is a patented product instead of traditional float valve. 6.5) uses a level control valve and an overhead seal oil tank to maintain a DP of approximately 5 psid (0.3 bar) and the seals in Figs. Model # 400A-036-T15. 6.6 and 6.7 utilize a DP control valve to maintain the differential pressure.This is because they are essentially Fluidmaster. Locate the compression sleeve, which is a ring that fits snugly at the end of the pipe. As pioneers in water supply protection and efficiency, our proven water & control management solutions include state-of-the-art hydraulic control valves, air valves and Excessive packing box temperatures. It directly control water supply and stop according to the level change. When a valve 2. Material incompatibilities. Float-cup fill valve (Note: While you have the cap off observe the water level in the inner chamber (photo 3). Non-modulating float valves fully when the liquid level in a tank reaches a pre-set low point.
For example, strengthening the bolts on sleeved plug valves in extremely corrosive situations may be enough to remedy a leaking problem and give your valves years more life. Features This valve is the replacement of the traditional float ballcock, which can be applied to various systems of high water tanks, pools, water towers of the industry and civil construction, Level Control Valves. Watermaster Irrigation is proud to be recognized as the pros in mowers, lighting, irrigation, and more since 1985. You can select any relay to suit your water pump's power source. Control valve repair. This eliminates the need to install a flotation mechanism, which makes it ideal for high level reservoirs. 28. Cla-Val Altitude Control Valves regulates the high water level in reservoirs without the need for floats or other devices. Otherwise, you risk causing more damage. Control valve sticks. PerforMAX Fill Valve, 502 Flapper and If its leaking, tighten the packing nut one-eighth of a turn at a time until the leak stops. 106/206-A-Type 1 Shipping to: 98837.
The opening operation allows for the tank to be refilled to a pre-set high point, at which time the valve closes drip-tight. It is critical to keep the water heater steady when you apply torque to those connectors.
Remove the old valve and compression sleeve. Level Control Valves. All you have to do is to put in the new valve. 3. Made from glass-filled thermoplastic and stainless steel. This valve is the replacement of the traditional float ballcock, which can be applied to various systems of high water tanks, pools, water towers of the industry and civil construction, etc. The product will be reserved for you when you complete your order. Find My Store. Cla-Val Pacific manufactures several different types of level control valves. To access this gasket, remove the 6 to 8 screws on the valve cover. This level controller was designed to complement a single solenoid-operated/override control valve and 4-20-mA level sensor or high/low level switches. Quality repairs using original spare parts ensure that your valves meet their original specifications after maintenance and will reach their maximum lifetime. The Level Control Panel with Touch Panel interface designed by Singer Valve was created to accomplish optimum level control feasibility and flexibility. Replace the cap snuggly onto the chamber with hand pressure. Distributor of water level control valves. 5. Call today! This control has a small 12V coil relay whose contacts are rated at 10A 120V. Turning the valve to the left or counter clockwise, it will begin to loosen. When the pool or tank water levels fall, the valve body will sink down and then the forerunner of the control valve will be opened. have been calculated for cavitating control valve applications involving water. (3) Getting a ' Leaking Shut Off Valves ' to stop can be a challenge. These non-throttling valves remain fully open until the pre-set shut-off point is reached. This will expose the packing nut completely. Features This valve is the replacement of the traditional float ballcock, which can be applied to various systems of high water tanks, pools, water towers of the industry and civil construction, etc. For instance, elevated aluminum levels in your elevators hydraulic tank can indicate wear on your pump housing. The distance for the motor to turn off and on needs to be specified. Bending the brass rod (up or down) or turning the adjusting screw at the top of the diaphragm cover is all you need to do to change the level of water in the tank. Liquid Level Control Valves. Automatic control, low self-complementary water, water full automatic stop Four intakes, large volume of water Beautiful appearance, small size, practical, simple installation Without Turn off the power to the leaking water heater. Next, shut off the water pressure to the tank. Tighten loose pipe fittings. Adjust the water temperature if the leak issues from the TPR valve. Test the pressure in the cold water supply. Replace a leaky drain valve. Replace the water heater if the leak is at the bottom of the tank. https://www.balkanplumbing.com/water-valve-replacement-repair-guide Regular maintenance enhances the life of your valves, requiring fewer replacements and cutting the level of repair work required during the valves useful life. Fluidmaster. Our service technicians and engineers are experienced, well trained and follow ISO 9001-certified processes at all our global service centers or while on assignment at your production plants. The control valve manipulates a flowing fluid, such as gas, Step 3 Remove the Handle and Install New Washer .
352 results for automatic water level control valve. Thermal cycling. It is a liquid level control valve that can generate a multi-point switch Use pliers to carefully rotate it and remove it from the pipe, then slide off the compression nut. Newer toilets will have variations of a vertical post that is in the corner of the toilet. Step 1: Proposed Control Slide Show The slide show included in this instructable shows the basic operating theory behind this control.
1. Touch the other ohmmeter probe to the terminal P. 5. Such applications occur in municipal water, rural
If you notice a control valve leaking internally, first check the maximum allowable leakage (MAL) specified by ANSI/FCI Standard 70-2. 28 products. Valve cover o-rings rarely go bad over time. Not all control valves are designed to be bubble-tight. to 3 in. Available in pipe sizes from 3/4 in. for pricing and availability. Turn the controller to manual and start the system watering. https://cascadeautomation.com/control-valve-repair-explained Liquid level control valves maintain constant pressure and operate automatically for accurate flow control in corrosive and ultra-pure liquid applications.
Turn the water back on, open the repaired water valve and check for leaks.
The Emerson Control Valve Handbook, 4th Update your shipping location. They are equipped with separate adjustable opening and closing speed controls. As the pipe water pressure affects, the seal face of control (2) A large percentage of valves have washers in them. ' There are a lot of capacitors, circuit boards, resistors, and semiconductors used. 3) The results of an oil analysis. Use an adjustable wrench to disconnect the lines connecting with the gas control valve. STEP 4: Turn the top of the valve clockwise to lock it in place. It will have a float attached to it that controls the water that is allowed in the tank. Getting the water level right is important. Add Tip Ask Question If the valve is set too high, turn off the water supply and flush the toilet. Products [31] 3/8" OD Black Tubing sold by Foot $0.40 Add To Cart 3/8c x 3/8c Elbow $2.95 Add To Cart Control valve leaks internally Control valves may leak internally for several reasons. Variations include one-way flow with delayed opening, one-way flow with pressure sustaining, and two-way flow designs. If you see a hexagonal (6-sided) nut, you'll know you have a compression valve.A threaded valve will have 2 to 6 flat sides where it meets the supply line. These flat sides allow you to remove the valve with a pipe wrench.If you have a sweat valve, you'll be able to see where the valve body is soldered, or melted, into the water supply line. Step 1: If your water softener has an electronic control head is it lit up and working? This valve helps control the water overflow. Discover how control valves are used to maintain operating conditions such as flow, pressure, temperature, and liquid level. Save this search. A counterclockwise turn of this crew raises the level of water while a clockwise turn lowers it. Our float valves directly control the maximum water level and our altitude valves control water levels from ground level. ANSI/FCI Standard 70-2 divides control valves into six different leak rate classifications and defines the maximum allowable leakage (MAL) for each. Because we hate overflow as much as you do. Ultrasonic Level Sensor Working Principle: This water level controller will use two components the ultrasonic sensor and relay board. The float level control valve has the function of automatically opening and closing the pipeline to control the water level. Deviation thus created is fed to the P + I controller. If not, the water level switch is bad and needs to be replaced. There will be a valve in the main water supply that you can turn to shut off the water that is being supplied to this water control valve. When You Need to Repair Your Control Valve 1. The first is that they arent actually designed to shut off 100%. Only angle-globe valves can be used for a 90-degree change in direction of flow.Check valves (other than the stop-check valves) stop flow only in one (reverse) direction. Some designs of ball-and-plug valves (contact the valve manufacturer) are suitable for throttling service.More items The water level is maintained by the use of a high precision pilot level control valve that accurately detects the height of the water level from a detection point at the bottom of the tank and controls the main fill valve accordingly. Altitude Valve: What is it. Residential, commercial, high performance, mechanical and hot water control valves. Once again, you will use your pipe wrench to unthread the old valve. However, we recommend replacing the o-ring if its damaged or broken. Peel the o-ring out, clean the groove, lubricate the new o-ring, and reinstall the cover.
Float Switches. Set the ohmmeter scale to the lowest ohms setting and ZERO the meter. Automatic Water Level Control Valve For Water Tank Water Tower Internal leakage.
Vibration of the valve assembly. 3. With the compression nut loosened, simply pull the old valve off of the pipe. Once the water supply is turned off, remove the handle from the stem. Specification: Material: ABS Plastic Color: Cream Type: 3/4" inlet Connection: Male thread Structure: floating ball Nominal Diameter: 20 (mm) Suitable medium: water Pressure environment: atmospheric Working temperature: high temperature Flow direction: one-way Drive: hydraulic control Both sides of the diameter: 2.4cm Size: 10.2x5.8x8.6cm/4.02 x 2.28 x 2.39"(L STEP 3: Adjust the height of the valve by twisting the top half of the valve counterclockwise and push down on the valve until the corner of the fill valve cover lines up with the top of the flush valve.
There are (3) Topics associated with this repair. Altitude control valves are automatic control valves used for controlling water levels in tanks and elevated storage reservoirs. As pioneers in water supply protection and efficiency, our proven water & control management solutions include state-of-the-art hydraulic control valves, air valves and advanced water meters. This video describes how to repair irrigation valves used in lawn irrigation systems. Of course, there are times when repair becomes necessary. Output of the controller is used to throttle 400A Universal Toilet Fill Valve with Brass Shank. Repairing Washered Shut Off Valves ' covers this topic. First, shut off the water supply. Step 5: Removing the Old Valve. Put in the new valve. Types include manual, automatic, diaphragm, solenoid operated and filter valves. If not, check to see if its plugged in or the breaker feeding it is tripped. Were the ones who help the pros. Remove the old washer and slide on the new one. Improper maintenance. This can be difficult, it will take some effort to get the old valve to loosen. Hi everyone, this is zavardy and this time ill be doing unboxing video for automatic water level control valve. Valve Recommendation Valve Replacement - Lower Cost HS-Valves Backwash Only Valve Replacement Options Water Softener Valve Replacements 5 year manufacturer parts warranty, owners/service manual, and 7 days a week technical support included. Touch and hold one ohmmeter probe to the terminal V. 4. 2. Add Tip. Repeatable, reliable operation each and every time! Reinstall the packing nut, tighten lightly with a wrench (dont over tighten at this or any other point) and reattach the handle. How Level Control Valves Work. Level control valves are used to maintain liquid levels for different process equipment such as - Vessels, distillation column bottom section, distillation column side liquid draw, etc. Liquid (or interface liquid) is in physical contact with gas or other liquid phase. Liquid is taken out from unit operations . Note: Product availability is real-time basis and adjusted continuously. You need to have an arsenal of information at the ready to ensure you get the right type, size, and characteristics for your application. Step 2: Check to make sure that your systems bypass valve has not been activated. It assumes that the pump is a small plug-in pump. (1) There are ' Different Types of Shut Off Valves ', knowing what type you have will aid in fixing it. with various end connections. Our level control valves are the ideal solution for preventing overflow in tanks, towers and reservoirs. In particular, our technicians are called out to job sites for four main reasons. No substance known is able to continuously withstand this form of abuse, meaning that cavitation will destroy any control valve given enough time. Elevator valve problems could be indicative of other issues with your elevator. 1/2 inch float valve, the water level control box is an upgraded version of the traditional float valve, used in swimming pools, livestock tanks, aquaculture, aquariums 146 $1399$14.99 Save 5% with coupon Get it as soon as Mon, Mar 28 FREE The ohmmeter should show ZERO resistance (continuity). An Altitude Valve is a mechanically operated control that relies on a differential of pressure between inlet and outlet to assume a Description: This valve is the replacement of the traditional float ballcock, which can be applied to various systems of high water tanks, pools, water towers of the industry and civil construction, There is a special program that executes the sensor. All of these seals have a seal oil inlet at a differential pressure above the reference gas pressure; however the bushing seal (Fig. Our float control valves are applicable anywhere it is necessary to automatically maintain the water level in storage tanks or reservoirs. The measured value is compared with the normal set value of the heater. Altitude Control. Pressure estimates as high as 1500 newtons per square millimeter (1.5 giga-pascals, or about 220000 PSI!)
It can save more than 60% water. The water level in the tank should be adjusted so that it is near the top of the fill tube in the center of the toilet. This may seem like a silly step but it The level of water in the tank could be too low or too high either because of improper settings or because of clogging or even leaks in several controls that we discuss beginning at BRINE TANK DIAGNOSIS & REPAIR - home. This water level control valve is a patented product instead of traditional float valve. 6.5) uses a level control valve and an overhead seal oil tank to maintain a DP of approximately 5 psid (0.3 bar) and the seals in Figs. Model # 400A-036-T15. 6.6 and 6.7 utilize a DP control valve to maintain the differential pressure.This is because they are essentially Fluidmaster. Locate the compression sleeve, which is a ring that fits snugly at the end of the pipe. As pioneers in water supply protection and efficiency, our proven water & control management solutions include state-of-the-art hydraulic control valves, air valves and Excessive packing box temperatures. It directly control water supply and stop according to the level change. When a valve 2. Material incompatibilities. Float-cup fill valve (Note: While you have the cap off observe the water level in the inner chamber (photo 3). Non-modulating float valves fully when the liquid level in a tank reaches a pre-set low point.
For example, strengthening the bolts on sleeved plug valves in extremely corrosive situations may be enough to remedy a leaking problem and give your valves years more life. Features This valve is the replacement of the traditional float ballcock, which can be applied to various systems of high water tanks, pools, water towers of the industry and civil construction, Level Control Valves. Watermaster Irrigation is proud to be recognized as the pros in mowers, lighting, irrigation, and more since 1985. You can select any relay to suit your water pump's power source. Control valve repair. This eliminates the need to install a flotation mechanism, which makes it ideal for high level reservoirs. 28. Cla-Val Altitude Control Valves regulates the high water level in reservoirs without the need for floats or other devices. Otherwise, you risk causing more damage. Control valve sticks. PerforMAX Fill Valve, 502 Flapper and If its leaking, tighten the packing nut one-eighth of a turn at a time until the leak stops. 106/206-A-Type 1 Shipping to: 98837.
The opening operation allows for the tank to be refilled to a pre-set high point, at which time the valve closes drip-tight. It is critical to keep the water heater steady when you apply torque to those connectors.